Description: The horizontal single-stage centrifugal single-suction pumps types E and EM are designed for transportation of pure water and other liquids free of mechanical admixtures and with viscosity and chemical activity similar to those of water and temperature not higher than 80 °C.

Applications: Water supply, irrigation, technological and other purposes in industry and agriculture. Max water temperature: 80°C. The shaft is sealed by a sealing gland

Manufacturer/ Origin: "Turbo-C" LTD, BULGARIA

El. Motor: Pumps driven by three-phase Bulgarian electric motors, IP54, 380V, 50Hz, / 60 Hz/, efficiency IE1, IE2 or IE3 depending on clients demands.

Materials: Basic parts of the pumps are made of the following materials:

- Impeller, suction body, discharge body, bearing body and coupling- grey cast iron;

- Shaft, connecting bolts and assembly elements- stainless steel;

Designation: The separate types and dimensions are designed by letters and figures. The letters define the type and execution, the numbers-the nominal discharge and head. The additional letter M stands for single block with the electric motor, and letter A-pump with reduced diameter of the impeller.
For example: 25E32M
25-nominal discharge in l/s;
E-centrifugal, single-stage with a bearing body;
32-total head of the pump at nominal discharge in m;
M- mono- block version.


up